Portforward

Juni0r · 07-02-2009, 04:17 PM

Hi i wonder if anyone could help me :P....with portforwarding....my router model is a zyxel p-660h-d1..i dont know the version hehe :P so i wonder if anyone could which one of theese two is the right one..192.168.0.1 or 192.168.1.1...thx !

clanmills · 07-02-2009, 04:27 PM

I wrote an article about this: http://www.clanmills.com/articles/portforwarding/

I have a similar modem and I think I have it set to 192.168.1.1. The router is 192.168.2.1 and all the network addresses are 192.168.2.x (100-200 for static IPs and 2..99 for DHCP adresses).

I believe moderator "AboveTheLogic" has also written an article about portforwarding - and I recommend you also read that.

You'll probably need some patience and tenacity to get portforwarding to work.

AboveTheLogic · 07-04-2009, 04:34 PM

Quote:

Originally Posted by Juni0r

Hi i wonder if anyone could help me :P....with portforwarding....my router model is a zyxel p-660h-d1..i dont know the version hehe :P so i wonder if anyone could which one of theese two is the right one..192.168.0.1 or 192.168.1.1...thx !

start > run > "cmd" [enter] > "ipconfig/all" [enter]

the default gateway is (almost certainly) the IP you put in to get to the router (I'm guessing this is your question)

alternatively, there is some online documentation available here:
http://www.zyxel.com/web/product_fam...0-B51A3ACED766

07-02-2009, 04:17 PM	#1
Juni0r Member Join Date: Jul 2009 Posts: 1	Portforward Hi i wonder if anyone could help me :P....with portforwarding....my router model is a zyxel p-660h-d1..i dont know the version hehe :P so i wonder if anyone could which one of theese two is the right one..192.168.0.1 or 192.168.1.1...thx !

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-02-2009, 04:27 PM	#2
clanmills Super Moderator Join Date: Jul 2008 Location: San Jose, CA Posts: 219	I wrote an article about this: http://www.clanmills.com/articles/portforwarding/ I have a similar modem and I think I have it set to 192.168.1.1. The router is 192.168.2.1 and all the network addresses are 192.168.2.x (100-200 for static IPs and 2..99 for DHCP adresses). I believe moderator "AboveTheLogic" has also written an article about portforwarding - and I recommend you also read that. You'll probably need some patience and tenacity to get portforwarding to work.