Linksys WRT54GL firmware 4.30.12

wimiadmin · 09-20-2008, 07:27 PM

Click on Applications and Gaming

The default tab selected is now Port Range Forward

In the first box, name your application. I'll use RDP (Remote Desktop Protocol) for my example.

Next, enter the start port of 3389

Since this is a single port, in the second box, enter 3389 again. So we're forwarding from 3389 through 3389 (only 1 port).

Next, choose the protocol from the drop down. In this case, it's TCP

Now, enter the last octet of the IP address to the computer on your LAN you wish to forward 3389 requests.

Place a check mark in the Enable box, hit Save Settings and you're done.

Brian

09-20-2008, 07:27 PM	#1
wimiadmin Administrator Join Date: May 2008 Location: Pigeon Forge, TN Posts: 889	Linksys WRT54GL firmware 4.30.12 Click on Applications and Gaming The default tab selected is now Port Range Forward In the first box, name your application. I'll use RDP (Remote Desktop Protocol) for my example. Next, enter the start port of 3389 Since this is a single port, in the second box, enter 3389 again. So we're forwarding from 3389 through 3389 (only 1 port). Next, choose the protocol from the drop down. In this case, it's TCP Now, enter the last octet of the IP address to the computer on your LAN you wish to forward 3389 requests. Place a check mark in the Enable box, hit Save Settings and you're done. Brian

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode